SLEWING JIB

 WALL CRANE

Wall-mounted crane lifting arm Suitable for lifting objects or products as along the side walls of the building.
Unlike wall-mounted crane arm spin that can run only on a pole that attaches only. And it looks different to
the crane's legs in one field. The crane's legs on the field, the same one-legged crane running on rails mounted
on a pole plant. Crane leg and another one run in the bottom of the plant floor. But Wall crane arm crane lifting
the leg series three legs six wheels running on rails second floor by the leg all crane installed at the raceway.
2 rack mounted to a pole beside the factory walls. Cranes and beams sticking out independently to lift objects
or goods. The use of lift trucks along the side of the plant. Like the crane's legs on one side field. But there are
more convenient The cranes are still not as widely used in many applications because the majority is not known.
Or do not understand the use of the crane species. The pillar structure is not designed to support healthy plant
raceway crane species. And when one does not know, or would be installed. The structure is not suitable plant
built with this type of construction waste.

Wall-mounted crane lifting arm Designers can create either a single beam and dual beam facility used mainly
done by positioning the crane runs for two overhead cranes running on rails above. And positioning the crane
arm raised wall below. But this kind are suitable for lifting very heavy weights. Should use weights from 1-5
tonnes should have arms protruding from the raceway to lift objects up to 6 meters and sprint speed should
not exceed 20 m / min, the use inverter control. out and stop Because of the long runs too fast. Or the issue
and stop the violence. For operators, this would be dangerous for the operators. And it is not safe for users.